NetApp cDot waiting for giveback error

If you want to take the filer back to system defaults, factory.

*> storage release disks

This command will release all disk reservations. Partner node must be down. Otherwise, DISKS CAN BE DESTROYED!
Do you wish to continue? y

Module Type 10GE Passive Copper(Compliant)[1 m]
link speed               10Gps
Module Type 10GE Passive Copper(Compliant)[1 m]
Nov 23 20:46:41 [ANYSTOR300-01:config.noPartnerDisks:CRITICAL]: No disks were detected for the partner; this node cannot perform takeover correctly.
WAFL CPLEDGER is enabled. Checklist = 0x7ff841ff
Nov 23 20:46:41 [ANYSTOR300-01:callhome.dsk.config:warning]: Call home for DISK CONFIGURATION ERROR

Please choose one of the following:

(1) Normal Boot.
(2) Boot without /etc/rc.
(3) Change password.
(4) Clean configuration and initialize all disks.
(5) Maintenance mode boot.
(6) Update flash from backup config.
(7) Install new software first.
(8) Reboot node.
Selection (1-8)? 4
qla_init_hw: CRBinit running ok: 8c633f
NIC FW version in flash: 5.4.9
qla_init_hw: CRBinit running ok: 8c633f
NIC FW version bundled: 5.4.55
qla_init_hw: CRBinit running ok: 8c633f
NIC FW version in flash: 5.4.9
qla_init_hw: CRBinit running ok: 8c633f
NIC FW version bundled: 5.4.55
link speed               10Gps
Module Type 10GBase-SR
link speed               10Gps
Module Type 10GE Passive Copper(Compliant)[1 m]
link speed               10Gps
Module Type 10GE Passive Copper(Compliant)[1 m]
WAFL CPLEDGER is enabled. Checklist = 0x7ff841ff
add host 127.0.10.1: gateway 127.0.20.1

Zero disks, reset config and install a new file system?: yes

This will erase all the data on the disks, are you sure?: yes

Rebooting to finish wipeconfig request.
Skipped backing up /var file system to CF